- Sliding furniture or cabinets are built with a 19 mm melamine board, with PVC edges (2” radius). They are built with robust hinges that open at a 270º angle. They are also manufactured for wheels so they can be moved.
- Drawers have aluminium handles. The side panels of drawers are manufactured with an epoxy finished overlay, with telescopic guides and locking mechanism. The drawer’s base and rear panels are built with melamine.
1. Sliding furniture
TECHNICAL CHARACTERISTICS | |
---|---|
Physical-mechanical characteristics | It maintains the values of the base board |
Dimensional stability in length | 0.7% |
Behaviour when exposed to cracking | Maximum classification: 1 | Res. to food and cleaning products | Maximum classification: 1 |
Behaviour when exposed to water steam directly | No cracks or dulling |
Resistance to the colour of light | After 100 h of exposure, there are no alterations to the colour |
Resistance to abrasion | Loss of weight after every 100 revolutions: 0.1 g. |
Adherence of the coating to the support | minimum 20 % of adhered fibres |
Formaldehyde emissions | 0.15 |
Mean thermal expansion coefficient, K, DIN 53752 | 16x104 |
Thermal conductivity, W/m-K, DIN 52612 | 0.22 |
Behaviour when exposed to fire, DIN 4102 | normal flammability |
Resistance to electric shock, KV/mm, IEC 243-1 | 62 |
Surface resistance, Ohm, DIN IEC 167 | 1014 |
Temperature range, ºC | 0 to + 100 |
Resistance to chemical products | very good when in contact with many acids, alkalis and solvents. |
Physiological innocuousness, in accordance with BGVV | yes |
- Built with a 19 mm melamine board, with PVC edge (2” radius). Assembled with dowels and glued, rear panel is assembled with 19 mm channels. With 2 glazed sliding doors.
2. Wall mounted cabinets
- Built with a 19 mm melamine board, with PVC edge (2” radius), including shelves.
- Assembled with dowels and glued, the rear panel is glued and assembled with 10 mm channels.
- It has been designed with 2 bodies:
a) Top section, with 2 sliding glass doors and partitions.
b) Lower section, with two blind sliding doors and height-adjustable partition.
3. Glass Cabinets - Chemical Products
- Dimensions: 60 cm (length) x 60 cm (width) x 200 cm (height).
- Built with a 19 mm melamine board, with 3 mm PVC edge (4” radius), including shelves.
- Assembled with dowels and glued, the rear panel is glued and assembled with 10 mm channels.
- It has been designed with 2 modules. Each module is composed of: Removable 30 cm front door with telescopic guides for a full extraction, 100 kg and 5 trays.
4. Removable reagent cabinets
- Built with a metallic structure of the same characteristics as those described for centre and wall mounted benches.
- This structure can be used to host shelves, electric, liquid and gaseous fluid service panels. It has been designed with a system that can be graduated to the desired height.
- Likewise, shelves are built with a structure that is similar to the one described above. They have storage supports on the column rods for assemblies and the shelves are height-adjustable, as in the case of the service-hosting panels.
5. Wall and centre shelf